Cold Drip Ground Coffee Holders HG2650 and HG2669 Explained
By Coffee Machine Warehouse | Published: 2026-11-01
Category: How-to Guides
Learn how to use the HG2650 and HG2669 cold drip ground coffee holders correctly, from loading to cleanup, with checkpoints to avoid common mistakes.
Quick answer
Use the ground coffee holder that matches your Tiamo brewer model: HG2650 for the HG2650 and HG2669 for the HG2669. Load it with medium-coarse grounds, level the bed without tamping, and rinse it promptly after each brew.
Why the holder model matters
The HG2650 and HG2669 holders are not interchangeable. Each is a replacement part for its specific Tiamo cold drip brewer, so ordering the wrong model means the holder will not fit properly. Check the model number on your brewer before you buy or swap a holder.
A correctly fitted holder keeps the coffee bed stable while water drips through. If the holder sits loosely or does not seal, water can bypass the grounds and produce a weak, uneven brew.
Grind size and bed preparation
Cold drip works best with a medium-coarse grind, similar to coarse sand. Too fine a grind slows the drip to a crawl and can clog the holder; too coarse lets water rush through without extracting enough flavor.
Level the grounds gently. Do not tamp them as you would for espresso — pressure compacts the bed and restricts flow. A light shake to settle the bed is enough.
Cleaning and storage between brews
Rinse the holder with warm water immediately after brewing. Dried coffee oils are harder to remove and can leave stale flavors in the next batch. Avoid harsh abrasives on glass parts.
Store the holder assembled or in a dry, dust-free spot. A chipped or cracked holder should be replaced before the next brew to prevent leaks or breakage during use.
Step-by-step: using the HG2650 or HG2669 holder
- Confirm your brewer model: Check the model number on your Tiamo brewer (HG2650 or HG2669) and select the matching holder. Common mistake: assuming the holders are universal — they are not interchangeable. If the model number is unclear, measure the old holder or contact the retailer before ordering.
- Rinse and dry the holder: Wash the holder with warm water and dry it fully before adding coffee. Common mistake: skipping the rinse, which can leave dust or residue that affects flavor. A clean, dry holder helps the coffee bed sit evenly.
- Add medium-coarse grounds: Fill the holder with medium-coarse grounds, leaving a small gap at the top. Common mistake: using espresso-fine grounds, which can clog the drip path. Aim for a texture like coarse sand.
- Level the bed without tamping: Gently shake or tap the holder to level the grounds. Do not press or tamp. Common mistake: tamping compacts the bed and slows the drip excessively. A loose, even bed promotes consistent extraction.
- Seat the holder in the brewer: Place the holder into the brewer according to the brewer's instructions and check that it sits flush. Common mistake: forcing a misaligned holder can crack glass or cause leaks. If it does not seat easily, stop and recheck the model.
- Start the drip and monitor: Begin the water drip and watch the flow rate. Common mistake: walking away without checking — a too-fast or too-slow drip signals grind or bed issues. Adjust grind slightly if the flow is far off; small changes go a long way.
- Clean immediately after brewing: Remove the holder, discard the grounds, and rinse with warm water. Common mistake: letting grounds dry in the holder, which makes cleaning harder and can leave stale odors. Prompt rinsing keeps the glass clear and the next brew clean.
Product facts
- Ground Coffee Holder - HG2650: Replacement glass ground coffee holder for the Tiamo HG2650 cold drip brewer. It is the correct fit only for the HG2650, so check your brewer model before ordering.
Ground Coffee Holder - HG2650 - Ground Coffee Holder - HG2669: Replacement ground coffee holder for the Tiamo HG2669 cold drip brewer. It is designed specifically for the HG2669, so using it on another model may cause fit or seal problems.
Ground Coffee Holder - HG2669
