Start with the space and power the Robur S needs
Before you dial in a single shot, confirm the grinder fits your counter and your electrical plan. The Mazzer Robur S Automatic measures 24cm wide, 45cm deep, and 72cm high, so allow clearance for the hopper and for loading beans. Its 900W motor and 420–500rpm burr speed are designed for busy service, but the catalog does not list voltage or plug type. Check those details with Coffee Machine Warehouse before you commit to a counter location.
The 1.8kg hopper capacity supports high-volume periods, but it also means the grinder is tall. If your back bar has low shelving, measure the full height with the hopper in place. The generous catch tray helps keep the workspace clean, and the integrated aluminium tamper lets baristas tamp directly from the dosing area.
Confirmed Robur S specifications for setup planning
- Mazzer Robur S Automatic Coffee Grinder Silver - New: 71mm conical burrs – Consistent particle distribution for perfect espresso extraction Conical burrs are the core of the grinder's espresso performance, so confirm they are the type your bar flow expects.

Mazzer Robur S Automatic Coffee Grinder Silver - New - Mazzer Robur S Automatic Coffee Grinder Silver - New: Stepless micrometric adjustment – Precision control over grind size Stepless adjustment means you can make very fine changes during dial-in without being locked into preset steps.
- Mazzer Robur S Automatic Coffee Grinder Silver - New: Grinding speed – Up to 1.4g per second for fast service This speed helps keep up during rushes, but it also means small adjustment changes can have a quick effect on extraction.
- Mazzer Robur S Automatic Coffee Grinder Silver - New: Soft lever dosing handle – Ergonomic and efficient dosing The lever gives baristas a tactile way to control dose delivery, which is useful when fine-tuning during service.
A practical dial-in sequence for the Robur S Automatic
The catalog does not include a manufacturer dial-in procedure, so use this as a general workflow. Always follow any instructions that come with your machine and grinder.
- 1. Set a baseline grind: Start with the stepless micrometric adjustment at a mid-range setting. Because the adjustment is stepless, note the position so you can return to it if you overshoot.
- 2. Dose a test shot: Use the soft lever dosing handle to deliver a dose into your portafilter. The integrated aluminium tamper lets you tamp immediately. Keep the dose consistent between tests.
- 3. Pull a shot and assess: Watch the flow. If it runs too fast, adjust the grind finer in small increments. If it runs too slow, adjust coarser. The stepless adjustment allows very small changes, so move in tiny amounts.
- 4. Repeat until the shot tastes balanced: Make one change at a time and taste after each adjustment. The 71mm conical burrs are designed for consistent particle distribution, so once you find the sweet spot, the grinder should hold it well.
- 5. Record your setting: Write down the grind setting and dose that worked for your coffee. This gives you a reference point for the next dial-in or when switching beans.
Why the stepless adjustment matters for cafe calibration
In a cafe, coffee changes as beans age and humidity shifts. The Robur S uses stepless micrometric adjustment, which means you are not limited to fixed steps. That is a real advantage when you need to nudge extraction without a big jump. The tradeoff is that you must keep track of your reference point; without steps, it is easier to lose your baseline if you adjust casually.
The 420–500rpm burr speed and 1.4g per second grinding speed mean the grinder works quickly. When you make an adjustment, purge a small amount of coffee to clear the old setting before you dose your test shot. The catalog does not specify purge quantity, so use your judgment and keep it consistent.
Daily checks that keep the Robur S consistent
The catalog mentions a generous catch tray to maintain a clean workspace. Beyond that, it does not list a detailed cleaning schedule. Use these general checkpoints as part of your cafe routine.
- Empty and wipe the catch tray: A clean tray prevents buildup and makes it easier to spot spills or grounds that could affect workflow.
- Check the hopper for stale beans: The 1.8kg hopper is large, so avoid leaving beans in it overnight if your volume is low. The catalog does not give a maximum holding time, so base this on your own freshness standards.
- Brush the dosing area: Grounds can accumulate around the soft lever dosing handle and the integrated tamper. A quick brush helps keep dosing consistent.
- Verify the grind setting: After cleaning or a bean change, confirm the stepless adjustment is still at your recorded reference point.
What the supplied information does not settle
The catalog does not provide a voltage or plug specification, a detailed cleaning procedure, or a manufacturer-recommended dial-in method. It also does not confirm whether the grinder is suitable for single dosing or for specific brew methods beyond espresso. For those details, contact Coffee Machine Warehouse directly. The Robur S is described as an automatic grinder for bustling coffee shops, and the confirmed specifications support that role, but your own service volume and workflow should guide the final decision.


