Why a Used Mazzer Robur Auto Deserves a Close Look
The Mazzer Robur Automatic has been a staple in busy cafés and espresso bars for years. Its 71mm conical burrs, 2kg bean hopper, and automatic dosing chamber are built for high-volume, consistent grinding. When you find a used unit, a careful inspection helps confirm it still delivers that performance.
This checklist focuses on the key components you can assess without a full service manual. Use it to spot potential issues before you commit to a purchase.
What the Catalog Confirms About the Mazzer Robur Auto
- Mazzer Robur Automatic Coffee Grinder Red - Used: 71mm conical burrs – Fast, consistent grinding for commercial demands Conical burrs are durable but can wear over time. Inspect for chips or uneven wear; replacement burrs are available but factor in the cost.

Mazzer Robur Automatic Coffee Grinder Red - Used - Mazzer Robur Automatic Coffee Grinder Red - Used: Stepless grind adjustment – Precision control for the perfect espresso shot The stepless mechanism should move smoothly without binding. Test it through the full range to ensure the adjustment collar isn't seized or stripped.
- Mazzer Robur Automatic Coffee Grinder Red - Used: Automatic dosing chamber – Keeps ground coffee ready at all times The dosing chamber mechanism and pull-tab should operate cleanly. Check for residual grounds or signs of jamming.
- Mazzer Robur Automatic Coffee Grinder Red - Used: Power – 900 Watts / 10amp Single Phase Confirm the motor runs quietly and doesn't draw excessive current. A 900W motor should start and stop without hesitation.
- Mazzer Robur Automatic Coffee Grinder Red - Used: Dimensions – 24cm (W) x 31cm (D) x 72cm (H) Ensure the grinder fits your counter space and that the 2kg hopper clears any overhead cabinets.
Inspection Checklist for a Used Mazzer Robur Auto
Work through these steps in order. If you cannot test a component, note it as a limitation.
- Visual inspection of the hopper and body: Look for cracks, dents, or missing parts. The red finish may show scratches but shouldn't have deep gouges that could affect seals.
- Check the burrs: Remove the hopper and upper burr carrier. Examine the 71mm conical burrs for chipped edges, uneven wear, or discoloration from overheating. Even wear is normal; significant damage suggests heavy use or a foreign object.
- Test the stepless grind adjustment: Turn the adjustment collar from coarse to fine and back. It should rotate smoothly without grinding noises or sticking. A seized collar may indicate internal damage or old coffee oils.
- Run the motor briefly: Plug in and start the grinder (empty). Listen for unusual sounds: rattling, grinding, or a high-pitched whine. The 900W motor should run quietly and stop promptly when switched off.
- Examine the automatic dosing chamber: Operate the pull-tab mechanism. It should dispense ground coffee without hesitation. Check for old coffee residue that could indicate infrequent cleaning.
- Verify the power cord and switch: Inspect the cord for cuts, fraying, or a loose plug. The on/off switch should feel positive and not wiggle.
What the Evidence Doesn't Tell You
The catalog confirms the Robur Auto's burr size, power, and dosing system, but it does not provide a service manual, burr replacement interval, or detailed disassembly instructions. If the grinder fails any of the above checks, consult a qualified technician before assuming a simple fix.
A used Mazzer Robur Auto can be a great value when its core components are sound. This checklist helps you separate a well-maintained workhorse from one that may need significant investment.


